FZ 41-25.1
Order now!
FZ + Steyr 4100 Multi Stage V
The perfect combination.
STOLL always fits. Attach, get going and experience the full power.
- Wide sleeved bearings on the moving parts with lubrication points that can be easily accessed from the outside.
- Quick to mount and dismount in just two minutes thanks to the proven STOLL drive-in system.
- All the hydraulic lines are under the beam rail, to ensure they are well protected and the driver has a clear view.
- Double-acting lifting cylinders for a particularly high lifting capacity.
- The Z-kinematics frees the view of the implement and ensures even greater lifting power.
- The cross bar is optimally positioned for the best view and to protect the hydraulic lines at the front.
- Safe and reliable parking stands that are easy to use – completely without implements.
- Euro quick release frame for attaching the implement in seconds with semi-automatic or electro-hydraulic locking mechanism.
PROFILINE NEXT GENERATION | SIZE 3 | |||
mech. parallel linkage | FZ 41-25 | |||
without parallel linkage | ||||
Suitable for tractors with kW/hp | kW hp |
50-80 70-110 |
||
Lifting force in the implement’s pivot point | below above |
Q1 Q2 |
daN daN |
2.510 1.680 |
Lifting force (blade) 300 mm before the pivot point | below above |
N1 N2 |
daN daN |
2.510 1.680 |
Lifting force (pallet) 800 mm before the pivot point | below above |
M1 M2 |
daN daN |
2.510 1.680 |
Breakout force 800 mm before the pivot point | below | R | daN | 2.900 |
Maximum lift height in the implement’s pivot point | H | mm | 4.100 | |
Overloading height (H-210) | L | mm | 3.890 | |
Dump height | A | mm | 3.060 | |
Dump width | W | mm | 790 | |
Digging depth | S | mm | 210 | |
Pivot point of lifting arms | B | mm | 1.945 | |
Tilt angle | below | X | °degree | 44 |
rescooped | X1 | °degree | 61 | |
Dump angle | above | Z | °degree | 57 |
Pump output rate | l/min. | 90 | ||
Stroke time | sec. | 3,3 | ||
Tilting time, implement | sec. | 0,5 | ||
Dumping time, implement | sec. | 1,1 | ||
Weight, lifting arms without implement | kg | 650 |
The values given are averages. Depending on the type of tractor, these values may deviate up or down. Calculated at 195 bar hydraulic pressure!