FZ 43-34.1
Order now!
FZ + Kubota M 7173 Premium KVT
The perfect combination.
STOLL always fits. Attach, get going and experience the full power.
- Wide sleeved bearings on the moving parts with lubrication points that can be easily accessed from the outside.
- Quick to mount and dismount in just two minutes thanks to the proven STOLL drive-in system.
- All the hydraulic lines are under the beam rail, to ensure they are well protected and the driver has a clear view.
- Double-acting lifting cylinders for a particularly high lifting capacity.
- The Z-kinematics frees the view of the implement and ensures even greater lifting power.
- The cross bar is optimally positioned for the best view and to protect the hydraulic lines at the front.
- Safe and reliable parking stands that are easy to use – completely without implements.
- Euro quick release frame for attaching the implement in seconds with semi-automatic or electro-hydraulic locking mechanism.
| PROFILINE NEXT GENERATION | SIZE 4 | ||||
| mech. parallel linkage | FZ 43-34 | ||||
| without parallel linkage | FS 43-34 | ||||
| Suitable for tractors with kW/hp | kW hp |
90-130 120-180 |
|||
| Lifting force in the implement’s pivot point | below above |
Q1 Q2 |
daN daN |
3.420 2.430 |
|
| Lifting force (blade) 300 mm before the pivot point | below above |
N1 N2 |
daN daN |
3.420 2.430 |
3.000 2.080 |
| Lifting force (pallet) 800 mm before the pivot point | below above |
M1 M2 |
daN daN |
3.420 2.430 |
2.480 1.640 |
| Breakout force 800 mm before the pivot point | below | R | daN | 4.580 | |
| Maximum lift height in the implement’s pivot point | H | mm | 4.320 | ||
| Overloading height (H-210) | L | mm | 4.110 | ||
| Dump height | A | mm | 3.290 | ||
| Dump width | W | mm | 780 | ||
| Digging depth | S | mm | 210 | ||
| Pivot point of lifting arms | B | mm | 1.945 | ||
| Tilt angle | below | X | °degree | 44 | |
| rescooped | X1 | °degree | 61 | - | |
| Dump angle | above | Z | °degree | 56 | |
| Pump output rate | l/min. | 90 | |||
| Stroke time | sec. | 4,8 | |||
| Tilting time, implement | sec. | 0,7 | 0,7 | ||
| Dumping time, implement | sec. | 1,7 | 2,3 | ||
| Weight, lifting arms without implement | kg | 775 | 675 | ||
The values given are averages. Depending on the type of tractor, these values may deviate up or down. Calculated at 195 bar hydraulic pressure!
