STOLL News archive - kubota-l-2602-frontloader-compactline-550-h-p

NEW Generation

FC 550 H/P
Order now!

FC + Kubota L 2602
The perfect combination.

STOLL always fits. Attach, get going and experience the full power.

  • High loading capacity thanks to the double-acting lift cylinder.
  • Maximum comfort for the driver with the visual display for the angle of the implement.
  • Faster and easier installation and removal with the swivel system.
  • Maximum stability: The cross tube is inserted through the boom and welded on both sides.
  • The supporting devices are easy to use, no tools required.
  • Double-sided implement locking mechanism on Skid Steer quick release frame.
  • Can adapt to all jobs – thanks to the special range of implements for this series.
  • Can also be equipped with practical accessories – such as the third pilot circuit, Comfort Drive or the anti-lowering guard.

FC COMPACTLINE       FC 550
TYPE        P
Suitable for tractors with kW/hp       29-44
40-60 
Weight of the tractor  

kg 1.800-2.300
Lifting capacity in the pivot point of the implement below
above
Q1
Q2
daN 1.170 *
1.120
Lifting force (blade) 300 mm before the pivot point below
above
N1
N2

daN 1.050
1.010
Lifting force (pallet) 700 mm before the pivot point below
above
M1
M2
daN 990
950
Breakout force 750 mm before the pivot point   R daN 1.430
Max. lifting height in the implement’s pivot point   H mm 2.800
Overhead loading height   L mm 2.630
Dump height   A mm 2.020
Dump width   W mm 500
Digging depth   S mm 120
Pivot point of lifting arms   B mm 1.276
Tilt angle below X ° degree 41
Dump angle above Z ° degree 70
Pump output rate     l/min. 40
Stroke time     sec. 3,2
Tilting time, implement below   sec. 1,1
Dumping time, implement above   sec. 1,8
Weight, lifting arms without implement     kg 290


The values given are averages. Depending on the type of tractor, these values may deviate up or down. The hydraulic pressure is at 140 bar for the FC 150, and at 170 bar for all other front loaders.

* Work with the front loader may only be carried out if there is a suitable rear weight in place due to the risk of the tractor tipping.

Read more …

 
 

Subscribe to our newsletter

Please enter your first and last name in the top field as well as your e-mail address in the field below and click on “Subscribe”.

Top
Für die Darstellung dieser Website werden Cookies verwendet, mit denen wir jedoch keine personenbezogenen Daten speichern.
Ok