FC 450 P 5401
Order now!
FC + LS MT 3.60
The perfect combination.
STOLL always fits. Attach, get going and experience the full power.
- High loading capacity thanks to the double-acting lift cylinder.
- Maximum comfort for the driver with the visual display for the angle of the implement.
- Faster and easier installation and removal with the swivel system.
- Maximum stability: The cross tube is inserted through the boom and welded on both sides.
- The supporting devices are easy to use, no tools required.
- Double-sided implement locking mechanism on Skid Steer quick release frame.
- Can adapt to all jobs – thanks to the special range of implements for this series.
- Can also be equipped with practical accessories – such as the third pilot circuit, Comfort Drive or the anti-lowering guard.
FC COMPACTLINE | FC 450 | |||
TYPE | P | |||
Suitable for tractors with kW/hp | 26-40 35-55 |
|||
Weight of the tractor | kg | 1.500-2.000 | ||
Lifting capacity in the pivot point of the implement | below above |
Q1 Q2 |
daN | 970 * 920 |
Lifting force (blade) 300 mm before the pivot point | below above |
N1 N2 |
daN | 870 820 |
Lifting force (pallet) 700 mm before the pivot point | below above |
M1 M2 |
daN | 820 780 |
Breakout force 750 mm before the pivot point | R | daN | 1.010 | |
Max. lifting height in the implement’s pivot point | H | mm | 2.590 | |
Overhead loading height | L | mm | 2.425 | |
Dump height | A | mm | 1.805 | |
Dump width | W | mm | 300 | |
Digging depth | S | mm | 110 | |
Pivot point of lifting arms | B | mm | 1.216 | |
Tilt angle | below | X | ° degree | 41 |
Dump angle | above | Z | ° degree | 74 |
Pump output rate | l/min. | 30 | ||
Stroke time | sec. | 3,3 | ||
Tilting time, implement | below | sec. | 1,3 | |
Dumping time, implement | above | sec. | 2,0 | |
Weight, lifting arms without implement | kg | 270 |
The values given are averages. Depending on the type of tractor, these values may deviate up or down. The hydraulic pressure is at 140 bar for the FC 150, and at 170 bar for all other front loaders * Work with the front loader may only be carried out if there is a suitable rear weight in place due to the risk of the tractor tipping.